Features

1. The mold installation work mold table adopts four-pillar oriented positioning, which can play a role of stability and balance. Under the mold table, the principle of multi-pivot rods is adopted, and hydraulic cylinder thrust is used to lift the mold table and drive the mold to run smoothly.

The running distribution is: ascending, forming, bottoming, shearing, descending, demoulding.

2. The heating oven is divided into upper and lower furnaces, the upper furnace is divided into 14 horizontal rows and 9 vertical sections, and the lower furnace horizontal 9 sections and 13 vertical sections. The temperature controller realizes PID automatic temperature control adjustment, and the temperature control error is less than 1.5℃.

4. The heater adopts buried ceramic far-infrared radiation components, which has high thermal effect and is safe and reliable.

5. The conveying part is conveyed by a motor, and the conveying length is accurate and stable. The conveying chain track has a built-in cooling water circuit, which has high cooling efficiency and saves water. The inner cover is made of stainless steel plate and the guide chain rail is made of mold steel, and the surface is nitrided. High surface hardness and long life.

6. The control system adopts PLC, touch screen man-machine interface operation, low center of gravity design, low cup height, stable operation, and conforms to the best height for standing operation and observation.

8. The gas circuit control part adopts imported valve SMC (Japan), with high working accuracy, long life, strong response ability, and high working frequency to ensure the stable operation of the machine.

9. Equipped with pneumatic roll roll, the maximum roll diameter is 0.8m, and the roll change is convenient.

10. Forming air pressure loop system configuration

no content yet

Features

1. The mold installation work mold table adopts four-pillar oriented positioning, which can play a role of stability and balance. Under the mold table, the principle of multi-pivot rods is adopted, and hydraulic cylinder thrust is used to lift the mold table and drive the mold to run smoothly.

The running distribution is: ascending, forming, bottoming, shearing, descending, demoulding.

2. The heating oven is divided into upper and lower furnaces, the upper furnace is divided into 14 horizontal rows and 9 vertical sections, and the lower furnace horizontal 9 sections and 13 vertical sections. The temperature controller realizes PID automatic temperature control adjustment, and the temperature control error is less than 1.5℃.

4. The heater adopts buried ceramic far-infrared radiation components, which has high thermal effect and is safe and reliable.

5. The conveying part is conveyed by a motor, and the conveying length is accurate and stable. The conveying chain track has a built-in cooling water circuit, which has high cooling efficiency and saves water. The inner cover is made of stainless steel plate and the guide chain rail is made of mold steel, and the surface is nitrided. High surface hardness and long life.

6. The control system adopts PLC, touch screen man-machine interface operation, low center of gravity design, low cup height, stable operation, and conforms to the best height for standing operation and observation.

8. The gas circuit control part adopts imported valve SMC (Japan), with high working accuracy, long life, strong response ability, and high working frequency to ensure the stable operation of the machine.

9. Equipped with pneumatic roll roll, the maximum roll diameter is 0.8m, and the roll change is convenient.

10. Forming air pressure loop system configuration